Supermicro A+ Server 4022G-6F — Supermicro A+ Server 4022G-6F User's Manual PDF Download

A+ Server 4022G-6F User's Manual Power Fail LED The Power Fail LED connection is located on pins 5 and 6 of JF1. Refer to the table on the right for pin definitions. HDD/FP UID Switch The HDD/UID Switch connections are located on pins 7/8 of JF1. Attach a hard-drive LED cable to display HDD or SATA activities. This connection can also be used as a front panel UID (Unit Identifier) switch. The UID LED on Pin 7 of JF1 works in conjunction with this UID Switch. When the user presses and releases the UID switch, the UID LED will be turned on or off to indicate the location of the unit.

(Refer to Page 2-11 for more details.) Overheat (OH)/Fan Fail/PWR Fail/UID LED Connect an LED cable to pins 13 and 14 of JF1 to use the Overheat/Fan Fail/Power Fail and UID LED connections. The Red LED on pin 14 provides warnings of an overheat, fan failure or power failure. The Blue LED on pin 13 works as the UID LED indicator for the front panel UID switch located on pins 8 of JF1. When Jumper J_UID_OW is set to off (default), the Red LED takes precedence over the Blue LED. (See Page 2-19 for details.) Refer to the table on the right for pin definitions. Power LED Connector The Power LED connector is on pins 15 and 16 of JF1. See the table on the right for pin definitions.

5-16 PWR Fail LED Pin Definitions (JF1) Pin# Definition 5 3.3V 6 PWR Fail LED HDD/UID Switch Pin Defi nitions (JF1) Pin# Definition 7 UID Signal/3.3V 8 HDD Active OH/Fan Fail/ PWR Fail/Blue UID _ LEDPin Defi nitions (JF1) Pin# Definition 13 Blue LED-Cathode (UID)/5.5V.SB _ 14 OH/Fan Fail/PWR Fail/UID LED (Red) OH/Fan Fail/PWR Fail LED Status (Red LED) State Indication Off Normal On Overheat Flashing Fan Fail Power LED Pin Definitions (JF1) Pin# Definition 15 PW ON _ 16 Ground