Chapter 6: Advanced Chassis Setup 6-7 Power Supply The A+ Server 4022G-6F has a single 920 watt power supply module. The power supply has an auto-switching capability, which enables it to automatically sense and operate at a 100V - 240V input voltage. An amber light is illuminated on the power supply when the power is off. An green light indicates that the power supply is operating. A second, identical power supply module may be installed to provide redundant power. With redundant power, the system does not need to be shut down when replacing a failed power supply module. If necessary, replace the power supply unit with an identical model which may be ordered directly from Supermicro.
Replacing the Power Supply 1. If necessasry, power down the system. 2. Unplug the AC power cord from the power supply module. 3. Remove the screws that secure the module to the chassis then pull it completely out. 4. Replace the failed unit with another unit of the exact same part number (see Appendix C). 5. Gently but firmly push the new unit all the way into the open bay. 6. Secure it to the chassis using the screws you previously removed. 7. Finish by replacing the chassis cover, plugging in the AC power cord, and powering up. 6-15