DC power supply modules Mechanical installation Devices in the range 10 ... 36 A (4 ... 18 kW) 6 6.5 6.5.2 Arrangement of the devices SSP94PN200 Fig. 6.5-1 Arrangement concept The technical data must be taken into account when planning and dimensioning a DC-bus interconnection. Arrange the devices as follows for operation in DC-bus interconnection via the DC busbars: ƒ Mount the devices side by side from the left to the right. ƒ Install the supplying device on the left side: – DC power supply module (in a first row), – DC feeding point (in following rows). ƒ Install the Multi Drive axis controllers from left to right with decreasing powers.
ƒ Single Drive axis controllers can be integrated to increase the braking power. These axis controllers must be equipped with the optional busbar set (E94AZJAxxx). 6.5-3 EDS94SPP101 EN 3.1-04/2007