User Manual of A90 Series Inverter 110 F17.30 VY1 invalid delay time 0.000-30.000 s 0.000 ● F17.31 VY2 valid delay time 0.000-30.000 s 0.000 ● F17.32 VY2 invalid delay time 0.000-30.000 s 0.000 ● F17.33 VY3 valid delay time 0.000-30.000 s 0.000 ● F17.34 VY3 invalid delay time 0.000-30.000 s 0.000 ● F17.35 VY4 valid delay time 0.000-30.000 s 0.000 ● F17.36 VY4 invalid delay time 0.000-30.000 s 0.000 ● F17.37 Virtual input terminal status VX8 VX7 VX6 VX5 VX4 VX3 VX2 VX1 000 00000 × 0: Invalid 1: valid F17.38 Virtual output terminal status VY8 VY7 VY6 VY5 VY4 VY3 VY2 VY1 000 00000 × 0: Invalid 1:
valid F18 Monitoring parameter group F18.00 Output frequency 0.00 to upper frequency limit Hz XXX × F18.01 Set frequency 0.00 to maximum frequency F00.16 Hz XXX × F18.02 Reserved F18.03 Estimate feedback frequency 0.00 to upper frequency limit Hz XXX × F18.04 Output torque -200.0 - 200.0 % XXX × F18.05 Torque setting -200.0 - 200.0 % XXX × F18.06 Output current 0.00 to 650.00 (rated power of motor: ≤ 75 kW) 0.0 to 6500.0 (rated power of motor:
> 75 kW) A XXX × F18.07 Output current percentage 0.0-300.0 (100.0 = the rated current of inverter) % 0.0 × F18.08 Output voltage 0.0 - 690.0 V XXX × F18.09 DC bus voltage 0 - 1200 V XXX × F18.10 Simple PLC running times 0 - 10000 XXX × F18.11 Simple PLC operation stage 1 - 15 XXX × F18.12 PLC running time at the current stage 0.0 - 6000.0 XXX × F18.13 Reserved F18.14 Load rate 0 - 65535 rpm XXX ×