sinee — A90 User Manual

User Manual of A90 Series Inverter Or, set F01.34=2 and press RUN . The inverter will start the rotary self-identification of the motor.  For the synchronous motor: Set F01.34=11 and press RUN . The inverter will start the static self-identification of the motor. Or, set F01.34=12 and press RUN . The inverter will start the rotary self-identification of the motor.  It takes about two minutes to complete the self-identification of the motor. Then the system will return to the initial power-on status.

 During the self-identification, if you press the STOP/RESET key STOP RESET , “E24” (parameter identification abnormality) will be displayed; and if you press the STOP/RESET key If the self-identification fails, “E24” (parameter identification abnormality) will be STOP RESET , the system will return to the parameter setting status. displayed. If the STOP/RESET key is pressed STOP RESET , the system will return to the parameter setting status. 254