cisco — Default Banner Configuration

Several manufacturers include NTP software for their host systems, and a publicly available version for systems running UNIX and its various derivatives is also available. This software allows host systems to be time-synchronized as well. DNS The DNS protocol controls the Domain Name System (DNS), a distributed database with which you can map hostnames to IP addresses. When you configure DNS on your device, you can substitute the hostname for the IP address with all IP commands, such as ping , telnet , connect , and related Telnet support operations. IP defines a hierarchical naming scheme that allows a device to be identified by its location or domain.

Domain names are pieced together with periods (.) as the delimiting characters. For example, Cisco Systems is a commercial organization that IP identifies by a com domain name, so its domain name is cisco.com . A specific device in this domain, for example, the File Transfer Protocol (FTP) system is identified as ftp.cisco.com . To keep track of domain names, IP has defined the concept of a domain name server, which holds a cache (or database) of names mapped to IP addresses. To map domain names to IP addresses, you must first identify the hostnames, specify the name server that is present on your network, and enable the DNS. Default DNS Settings Table 1:

Default DNS Settings Default Setting Feature Enabled. DNS enable state None configured. DNS default domain name No name server addresses are configured. DNS servers Login Banners You can configure a message-of-the-day (MOTD) and a login banner. The MOTD banner is displayed on all connected terminals at login and is useful for sending messages that affect all network users (such as impending system shutdowns). The login banner is also displayed on all connected terminals. It appears after the MOTD banner and before the login prompts.

In default banner configuration, the MOTD and login banners are not configured For complete syntax and usage information for the commands used in this section, see the Cisco IOS Configuration Fundamentals Command Reference, Release 12.4 . Note Default Banner Configuration The MOTD and login banners are not configured. Administering the Device DNS Administering the Device 7