AEXT01 H

2007-06-25 http://www.delta.com.tw/industrialautomation/ 5011665900-AXE0 Connector for EH/PM Series Instruction Sheet Warning 9 Read this instruction sheet carefully before using DVPAEXT01-H. 9 DVPAEXT01-H is an OPEN TYPE device and therefore should be installed in an enclosure free of airborne dust, humidity, electric shock and vibration. The enclosure should prevent non-maintenance staff from operating the device (e.g. key or specific tools are required to open the enclosure) in case danger and damage on the device may occur. 9 DVPAEXT01-H (including DVPAEXT1L-H and DVPAEXT1R-H) is used for connecting MPU and extension unit or among extension units.

Use DVPACAB4A09/DVPACAB4A18 to extend the transmission distance between DVPAEXT1L-H and DVPAEXT1R-H. 9 Make sure the power of the MPU and extension unit is switched off when wiring and power on MPU and the extension unit after the installation of DVPAEXT01-H is completed. X Introduction 1.1 Model Explanation & Peripherals Thanks you for choosing Delta's DVP series accessory. DVPAEXT01-H is a connector for the extension cable of extension units. The maximum extension distance available is 1.8m. DVPAEXT01-H is only applicable for the connection between EH/PM series MPU and DI/DO, AI/AO extension units. Nameplate & Serial No. Nameplate Serial No. Delta PLC model name Production No.

Production week Production year (2007) Production plant (W: Wujiang T: Taoyuan) Model name Barcode, Serial No. 1.2 Product Profile & Outline DVPAEXT1L-H in the left side (prior level) DVPAEXT1R-H in the right side (next level) 6 5 1 1 6 3 3 2 6 6 5 3 4 3 Unit: mm 3 4 1 Upper cover of connection port 4 DIN rail 2 Terminal for extension cable 5 Extension cable 3 DIN rail clip 6 Direct fixing hole

Page 1

Y Specifications Z Installation Using DVPAEXT01-H to connect EH/PM series MPU with DI/DI, AI/AO extension units [ Wiring When installing DVPAEXT1L-H and DVPAEXT1R-H, please use DVPACAB4A09/DVPACAB4A18 connection cable.  Note: The DVPAEXT01-H package does not contain the connection cables mentioned above. Please purchase the cables from our distributors. TO DVPAEXT1L-H TO DVPAEXT1R-H 25 13 1 14 14 1 13 25 25 PIN D-SUB 25 PIN D-SUB 25 PIN D-SUB female DVPAEXT1L-H COM Port 25 PIN D-SUB female DVPAEXT1R-H COM Port 1 1 ． ． ． 25 25 The content of this instruction sheet may be revised without prior notice.

Please consult our distributors or download the most updated version at http://www.delta.com.tw/industrialautomation DVPAEXT01-H Model Item DVPAEXT1L-H DVPAEXT1R-H Power supply Supplied by MPU through its internal bus: 5V DC（4.5 VDC ~ 5.5 VDC）（-10% ~ 10%） Power consumption 0.5W 0.5W ESD: 8KV Air Discharge EFT: Power Line: 2KV RS: 26MHz ~ 1GHz, 10V/m Noise immunity Operation: 0°C ~ 55°C (temperature), 50 ~ 95% (humidity), pollution degree 2 Storage: -25°C ~ 70°C (temperature), 5 ~ 95% (humidity) Operation/storage Shock/vibration International standard: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea) immunity Weigh (g) 100 100

Page 2