AH500 Hardware Manual AH05PM-5A 3-72 Item Specifications The number of sampled pulses is in the range of -200000 to 200000. The number of accumulated pulses is in the range of -999999999 to 999999999. The number of input pulses is in the range of -2147483648 to 2147483648. Range Linear count Circular count Type CH0: X0.0+ and X0.0- CH1: X0.1+ and X0.1- CH2: X0.2+ and X0.2- CH3: X0.3+ and X0.3- Input (differential input) RESET input Signal level 5~24VDC Maximum 15 mA current CH0: The high-speed pulse output Y0.8 is a transistor whose collector is an open collector. CH1: The high-speed pulse output Y0.9 is a transistor whose collector is an open collector. CH2:
The high-speed pulse output Y0.10 is a transistor whose collector is an open collector. CH3: The high-speed pulse output Y0.11 is a transistor whose collector is an open collector. Output type Comparison output Signal level 24 VDC Maximum 15 mA current Weight 200g Specifications Item AH05PM-5A Number of actual axes 2 axes Storage The capacity of the built-in storage is 64K steps. Unit Motor unit Compound unit Mechanical unit Users can set the initial register involved in the data exchange in a CPU Connection with a CPU module, and the number of registers involved in the data exchange in the module CPU module. Four hundred data registers at most can be involved in the data exchange.
There are three types of pulse output modes. These modes adopt the differential output. Motor control 1. Pulse/Direction 2. Counting up/Counting down 3. A/B-phase output Single axis: 1M PPS Maximum speed Multi-axis interpolation: 1M PPS Input Detector X0.0, X0.1, X0.8, X0.9, X0.12, and X0.13 signal Output Servo output Y0.0+, Y0.0-, Y0.2+, Y0.2-, Y0.1+, Y0.1-, Y0.3+, Y0.3-, Y0.8, and Y0.9 signal signal External communication port Mini USB port Number of basic instructions 27 Number of applied 130 instructions