Mitsubishi — 4.1 Assigning I/O Addresses

AH500 Hardware Manual 4.1 Assigning I/O Addresses The assignment of input devices and that of output devices to an AH500 series input/output module installed on a local backplane are explained in this chapter. HWCONFIG in ISPSoft The following is the HWCONFIG window in ISPSoft. Please refer to chapter 8 in AH500 Operation Manual for more information related to the hardware configuration. Software-defined address Addresses are automatically assigned to an input/output module through HWCONFIG in ISPSoft. In other words, a start address is automatically assigned to an input/output module through HWCONFIG in ISPSoft.

User-defined address Users can assign a start address to an input/output module through HWCONFIG in ISPSoft. The advantage is that a start address assigned to an input/output module is the address set by users. Besides, users can write a program easily. 4-2