Chapter 5 Wiring Ethernet port 5.4 Wiring Digital Input/Output Modules The wiring of digital input/output modules is illustrated simply in this section. The simplistic wiring diagrams below also illustrate how the power supplies are connected to S/S, UP, ZP and COM. If users want to get more information about the wiring of digital input/output terminals, they can refer to section 5.5 in this manual.
5.4.1 Wiring AH16AM10N-5A 16AM10N 0 2 3 1 5 4 6 7 9 8 15 10 11 12 13 14 0 2 1 4 3 6 5 8 7 10 9 12 11 14 13 15 S/S S/S 24VDC 5mA 5-11 4 Ground 5 Ground Pin Signal Description 1 TX+ Transmitting data (positive pole) 2 TX- Transmitting data (negative pole) 3 RX+ Receiving data (positive pole) 4 -- N/C 5 -- N/C 6 RX- Receiving data (negative pole) 7 -- N/C 8 -- N/C Input form Direct current (sinking or sourcing) Input current 24 VDC, 5 mA