AH500 Hardware Manual Revision History Version Revision Date 1 s t The first version was published. 2012/11/09 2 n d 1. The information about AHPS15-5A, AH32AM10N-5A, AH32AM10N-5C, AH16AR10N-5A, AH32AN02T-5A, AH32AN02T-5C, AH32AN02P-5A, AH32AN02P-5C, AH08AD-5C, AH08DA-5C, AH08PTG-5A, AH15PM-5A, AH10PFBM-5A, AH10PFBS-5A, AH10COPM-5A, AHRTU-PFBS-5A, AHAADP01EF-5A/AHAADP02EF-5A, and DVPAETB-IO34C are added to all the chapters. 2. The descriptions of the modules in Chapter 1 are updated. 3.
The storage temperature, the program capacity of AHCPU500, the specifications for the input/output relays, the specifications for AH16AR10N-5A, the functional specifications for analog input/output modules, the electrical specifications for the temperature m easurem ent modules, the specifications for AH02HC-5A/AH04HC-5A, and the response characteristics of the input terminals on AH05PM-5A/AH10PM-5A in Chapter 3 are updated. 4. The figures in Chapter 4 are updated. 5. The wiring diagrams in Chapter 5 are updated. 6. The arrangem ent of the terminals in section 5.10.2 is updated. 7.
The error code 16#005D is added to section 9.1.2, and the error codes 16#6500~16#6502 are added to section 9.1.5. The information about AH15PM-5A is added to section 9.2.3. Section 9.2.8~section 9.2.10 are new sections. 2014/05/16 3 n d 1. The information about AHCPU511-RS2, AHCPU511-EN, AHCPU521-EN, AHCPU531-EN, AH08AD-5Aand AH08DA-5A are added 2. Update high-density terminal block installation to section 2.3.4. 3. Update the maximum number of modules which can be installed to section 3.2.1. 4. Update the information about applicable power supply module to section 3.3.1. 5. Update the information about the terminal of AH32AN02P-5B to section 3.5.4. 6.
Update information about interrupt input terminal for AH05PM-5A, input signal detector, contents of terminal X1.2~1.5 for AH15PM-5A, and input signal detector, contents of terminal X0.10~0.15 for AH20MC-5A to section 3.9.1. 7. Update information about 2/3/4-wire to section 5.1. 8. Update information about wiring power supply modules to section 5.2.3. 9. Update information about wiring to section 5.6 and 5.7. 10. Update figures to section 5.8.4.1. 11. Update information about interrupt input terminal for AH05PM-5A, input signal detector, contents of terminal 2016/05/27