Mitsubishi — 5.10.1 Specifications for Motion Control Modules

Chapter 5 Wiring Description of the terminals 5-67 Terminal Description c Response c Maximum input haracteristi Curren t Voltage X0.0+, X0.0-, X0.1+, X0.1-, X0.2+, X0.2-, X0.3+, and X0.3- 1. They are differential input terminals. 2. The functions of the terminals:  Motion control: They are the PG input terminals for axis 1~axis 4.  High-speed counter: X0.0+ and X0.0- are the RESET input terminals for counter 0. X0.1+ and X0.1- are the RESET input terminals for counter 1. X0.2+ and X0.2- are the RESET input terminals for counter 2 and counter 4. X0.3+ and X0.3- are the RESET input terminals for counter 3 and counter 5.  High-speed comparison and catch:

The terminals can function as trigger signals for high-speed catches. 200 kHz 15 mA 5~24 V X0.8 and X0.9 1. They are single/A/B-phase input terminals. 2. The functions of the terminals:  Motion control: The terminals are for a manual pulse generator.  High-speed count:  The terminals are for counter 0.  X0.8 is the A-phase input for counter 0, and X0.9 is the B-phase input for counter 0.  High-speed comparison and catch: The terminals can function as trigger signals for high-speed catches.  Interrupt input terminals 100 kHz (*1) 15 mA 24 V X0.10, X0.11, X0.12, X0.13, X0.14, and X0.15 1 They are single/A/B-phase input terminals. 2 The functions of the terminals:  Motion control:

They are the DOG input terminals for axis 1~axis 6.  High-speed counter:  The terminals are for counter 1~counter 5.  X0.10 is the A-phase input for counter 1, X0.12 is the A-phase input for counter 2 and counter 4, and X0.14 is the A-phase input for counter 3 and counter 5.  X0.11 is the B-phase input for counter 1, X0.13 is the B-phase input for counter 2 and counter 4, and X0.15 is the B-phase input for counter 3 and counter 5.  High-speed comparison and catch: The terminals can function as trigger signals for high-speed catches.  Interrupt input terminals 100 kHz (*1) 15 mA 24 V Y0.8, Y0.9, Y0.10, and Y0.11 1.

The high-speed pulse output terminals are transistors whose collectors are open collectors. 2. The functions of the terminals:  Motion control:  The terminals are the CLEAR output terminals for axis 1~axis 4, and provide the PWM function. 200 kHz 15 mA 24 V