Chapter 5 Wiring 5.10.2 I/O Extension Cables and External Terminal Modules A connector for a motion control module connects an I/O extension cable to an external terminal module. Users can install wires on the input and output terminal blocks in the external terminal module. 1. I/O extension cable UC-ET010-13B/UC-ET010-15B UC-ET010-13B is a 36-pin I/O extension cable for AH04HC-5A and AH20MC-5A. UC-ET010-15B is a 50-pin I/O extension cable for AH10PM-5A. 2. External terminal module for AH04HC-5A and AH20MC-5A: UB-10-IO16C 3. External terminal module for AH10PM-5A: UB-10-IO24C 5-73 Terminal Des Response cription characteristi c Maximum input Curren t Voltage 1.
The high-speed pul transistors whose c Y0.8, Y0.9, 2. The function of the Y0.10, and High-speed co Y0.11 terminals can f comparison ou se output terminals are ollectors are open collectors. terminals: 200 kHz mparison and catch: The unction as high-speed tput terminals.
15 mA 24 V C3 C2 C1 C0 N/C N/C X0.3- X0.15- X0.14- X0.2- X0.13- X0.12- X0.1- X0.11- X0.10- X0.0- X 0.9- X0.8- 24G 24G FE Y0.11 Y0.10 Y0.9 Y0.8 N/C N/C X0.3+ X0.15+ X0.14+ X0.2+ X0.13+ X0.12+ X0.1+ X0.11+ X0.10+ X0.0+ X 0.9+ X0.8+ N/C 24V 24V 1st from the C3 C2 C1 C0 N /C Y0.7- Y0.6- Y0.5- Y0.4- Y0.3- Y0.2 - Y0.1- Y0.0- N/C upper left 1 5th from th e N/C X0.15 X0.13 X0.11 X 0.9 N/C N/C X0.3- X0.2- X0.1- X0.0 - 24G 24G FE upper left 1st from the Y0.11 Y0.10 Y0.9 Y0.8 N /C Y0.7+ Y0.6+ Y0.5+ Y0.4+ Y0.3+ Y0.2 + Y0.1+ Y0.0+ N/C lower left 1 5th from th e S/S X0.14 X0.12 X0.10 X 0.8 N/C N/C X0.3+ X0.2+ X0.1+ X0.0 + N/C 24V 24V lower left