Mitsubishi — 3.2.3 Profiles

AH500 Hardware Manual 3-6 Number Name Description indicator ON: A serious error occurs in the I/O bus. OFF: The I/O bus is normal. Blinking: A slight error occurs in the I/O bus. System status of the CPU module ON: The external input/output is forced ON/OFF. SYSTEM LED OFF: The system is in a default status. indicator Blinking: The CPU module is being reset./The value in the device is 2 being cleared. COM LED indicator Communication status of the communication port COM1 LED indicator OFF: There is no communication through the communication port. COM2 LED indicator Blinking: There is communication through the communication port.

3 COM2 Providing the RS-232/RS-485/RS-422 communication interface 4 COM1/COM Providing the RS-232/RS-485/RS-422 communication interface 5 Ethernet port Providing the Ethernet communication interface 6 USB port Providing the mini USB communication interface 7 SD slot Providing the SD interface Function which the system executes OFF: No action (default) SW1 ON: Write protection OFF: No action (default) ON: The system is restored when the CPU module is supplied SW2 with powered. (The user program, the CPU paramter, the module table, and the setting values in the devices are restored from the memory card to the CPU module.) OFF: No action (default) 8 DIP switch ON:

It is used with the CLR button to backup the system. SW3 (The user program, the CPU paramter, the module table, and the setting values in the devices are backupped from the memory card to the CPU module.) It is used with SW3. OFF: When the system is backupped, the values in the devices SW4 are backupped. ON: When the system is backupped, the values in the devices are not backupped. 9 RST button Resetting the CPU module, and restoring it to the default factory value 10 CLR button Clearing the value in the latched device RUN: The user program is executed. 11 RUN/STOP switch STOP: The execution of the user program stops.

12 Label Nameplate 13 Set screw Fixing the module 14 Connector Connecting the module and a backplane. 15 Projection Fixing the module