Chapter 3 Specifications for Products 3.4 Specifications for the Power Supply Module 3.4.1 General Specification s AHPS05-5A AHPS15-5A 3-13 Item Specifications 100~240 VAC (-15%~10%) 50/60 Hz±5% Supply voltage Action If the input power supply is larger than 85 VAC, the power supply module can function normally. specifications Allowable If the instantaneous power failure time is within ten milliseconds, the power supply module keeps running. instantaneous power failure time Fuse 4 A/250 VAC Inrush current 45 A within 1 millisecond at 115 VAC The maximum current is 2.5 A. It is only for a backplane.
24 VDC output The 24 VDC output is equipped with the short circuit protection and the overcurrent protection. Power protection Surge voltage 1,500 VAC (Primary-secondary), 1,500 VAC (Primary-PE), 500 VAC (Secondary-PE) withstand level Above 5 MΩ (The voltage between all inputs/outputs and the ground is 500 VDC.) Insulation voltage The diameter of the ground should not be less than the diameters of the cables connected to the terminals L and N.
Ground Weight 380g Item Specifications Supply voltage 24 VDC (-35%, +30%) Allowable 10 milliseconds instantaneous power failure time Fuse 6.3 A/250 VAC Inrush current 30 A within 100 milliseconds 24 VDC output 1.5 A Maximum output 36 W power The 24 VDC output is equipped with the short circuit protection, the overcurrent protection, and the overvoltage protection. Power protection Surge voltage 500 VAC withstand level Ground The diameter of the ground should be greater than 1.6 mm2. Weight 380g