Mitsubishi — 3.5.1 General Specifications

Chapter 3 Specifications for Products *1: The scan cycle affects the frequency. *2: The terminals UP and ZP needs to be connected to the 24 VDC auxiliary power supply (-15%~+20%), and the rated current consumption is 1 mA/output. *3: The life cycle curve is shown below.

2000 3000 1000 0.4) ψ = =0.4) ψ Operation(X10 ) 3 500 200 300 100 30 50 20 0.5 0.1 0.2 0.3 0.7 1 2 Contact Current(A) 3-19 Model AH32AN02T AH32AN02P AH32AN02 AH32AN02 AH32AN02 32AN02P- AH64AN02T AH64AN02P Item -5A -5A T-5B P-5B T-5C 5C -5C -5C Number of outputs 32 32 32 32 32 32 64 64 Removable terminal block DB37 connector Latch connector Connector type Transistor–T (sinking) Transistor-P (sourcing) Output type Voltage specifications 12~30 VDC*2 Resistance 0.1 A/output (1 A/COM) Maximum Inductance Not applicable load Bulb Not applicable Maximum Resistance 100 Hz output Inductance - frequency*1 Bulb - Maximum OFF→ON 0.5 ms Response time ON→OFF Weight 180g 180g 150g 150g 140g 140g 220g 220g 120V AC R esis tive ms) (cos 30VD C In ducti ve(t =7 24 24 0VA C Ind uctive 12 12 0VA C Indu ctive 30V Indu DC ctive (t (t =40m s)