Mitsubishi — 3.5.2 Profiles

Chapter 3 Specifications for Products  AH32AM10N-5A/AH32AN02T-5A/AH32AN02P-5A 24VDC 5mA 12~24VDC 0.1A 12~24VDC 0.1A 12~24VDC 0.1A 12~24VDC 0.1A  AH32AM10N-5B/AH32AN02T-5B/AH32AN02P-5B 32AN02T 10 11 12 8 9 2 1 0 5 4 3 13 14 15 7 6 32AN02P 10 11 12 8 9 2 1 0 5 4 3 13 14 15 7 6 6 8 0 1 9 11 12 10 2 3 5 4 13 14 15 6 7 8 0 1 9 11 12 10 2 3 5 4 13 14 15 6 7 4 32DI-DC 24VDC 5mA 32DO-T Sink 12~24VDC 0.1A 32DO-T Source 12~24VDC 0.1A 8 3-21 1 2 3 32AM10N 0 1 2 3 4 5 6 7 8 910 11 12131415 0 1 2 3 4 5 6 7 8 910 11 12131415 0 1 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 S/S S/S S/S S/S 32AN02P 0 1 2 3 4 5 6 8 9101112131 0 1 2 3 4 5 6 8 9101112131 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 UP UP ZP ZP 32AN02T 7 0 1 2 3 4 5 415 8 910 11 1213 7 0 1 2 3 4 5 415 8 910 11 1213 1 0 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 13 13 14 14 15 15 UP UP UP UP ZP ZP ZP ZP 6 7 1415 6 7 14 15 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 UP UP ZP ZP 5 6 7 Number Name Description 1 Model name Model name of the module Input/Output LED indicator If there is an input signal, the input LED indicator is ON.

2 If there is an output signal, the output LED indicator is ON. Removable terminal block The inputs are connected to a switch or a sensor. 3 The outputs are connected to a load which will be driven, e.g. a contact, or a solenoid valve. Description of the inputs/outputs 4 Number of inputs/outputs and specifications 5 Set screw Fixing the module 6 Label Nameplate 7 Projection Fixing the module 1 2 3 32AM10N 0 1 2 3 4 5 6 7 8 910 11 121314 15 0 1 2 3 4 5 6 7 8 91011 121314 15 7 5 Number Name Description 1 Model name Model name of the module Input/Output LED If there is an input signal, the input LED indicator is ON. 2 indicator If there is an output signal, the output LED indicator is ON.

3 DB37 connector It is connected to the I/O extension cable UC-ET010-33B. Description of the 4 Number of inputs/outputs and specifications inputs/outputs 5 Label Nameplate 6 Set screw Fixing the module 7 Connector Connecting the module and a backplane 8 Projection Fixing the module