Chapter 4 Analog Input/Output Module AH06XA *5. If the ripple voltage of the input terminal of the load connected is large, and results in interference with the wiring, please connect a 0.1~0.47 μF and 25 V capacitor. *6. Please connect the ground wire in the shielded cable to the terminal SG. *7. Once AH06XA-5A is installed on a backplane, the connection between the terminal SG on AH06XA-5A and the terminal on the backplane will be a short circuit. Please connect the terminal on the backplane to the ground terminal . 4.3.4 LED Indicators 4.4 HWCONFIG in ISPSoft 4.4.1 Initial Setting (1) Start ISPSoft, and then double-click HWCONFIG .
4-19 Number Name Description Operating status of the module RUN LED 1 ON: The module is running. indicator OFF: The module stops running. Error status of the module ERROR LED ON: A serious error occurs in the module. 2 indicator OFF: The module is normal. Blink: A slight error occurs in the module.