Chapter 1 Introduction 1-3 Classification Model Name Description Temperature measurement module AH04PT-5A Four-channel four-wire/three-wire RTD Sensor type: Pt100/Pt1000/Ni100/Ni1000 sensor, and 0~300 Ω input impedance Resolution: 0.1 ℃/0.1 ℉ (16 bits) Four-wire conversion time: 150 ms/channel Three-wire conversion time: 300 ms/channel AH08PTG-5A Eight-channel four-wire/three-wire/two-wire RTD Sensor type: Pt100/Pt1000/Ni100/Ni1000, and 0~300 Ω input impedance Resolution: 0.1 ℃/0.1 ℉ (16 bits) Conversion time: 20 ms/4 channels and 200 ms/8 channels AH04TC-5A Four-channel thermocouple temperature sensor Sensor type: J, K, R, S, T, E, N, and -150~+150 mV Resolution:
0.1 ℃/0.1 ℉ Conversion time: 200 ms/channel AH08TC-5A Eight-channel thermocouple temperature sensor Sensor type: J, K, R, S, T, E, N, and -150~+150 mV Resolution: 0.1 ℃/0.1 ℉ Conversion time: 200 ms/channel Motion control module AH02HC-5A Two-channel high-speed counter module (200 kHz) AH04HC-5A Four-channel high-speed counter module (200 kHz) Network module AH10EN-5A It is an Ethernet communication module. It can function as a mater or a slave. It is equipped with two Ethernet ports, and supports a Modbus TCP master. AH10SCM-5A It is a serial communication module with two RS-485/RS-422 ports, and supports Modbus and the UD Link protocol.
There is isolation between two parts of communication, and there is isolation between two parts of power. AH10DNET-5A It is a DeviceNet communication module. It can function as a master or a slave. The maximum communication speed is 1 Mbps. AH10PFBM-5A PROFIBUS-DP master module AH10PFBS-5A PROFIBUS-DP slave module AH10COPM-5A It is a CANopen communication module. It can function as a master or a slave. Remote I/O module AHRTU-DNET-5A DeviceNet remote I/O module AHRTU-PFBS-5A PROFIBUS-DP remote I/O module