AH500 Module Manual code in SR0 is 16#2003. 3. If the value in n exceeds the range, the operation error occurs, the instruction is not executed, SM0 is ON, and the error code in SR0 is 16#200B. 4. Due to the fact that the use of the instruction TO decreases the execution efficiency of the CPU module and that of the I/O module, users should use it less often. 5. The descriptions of the error codes: 8-20 Error code Description 16#2003 Please refer to point 1 and point 2 in the additional remark. 16#200B Please refer to point 3 in the additional remark. 16#1400 An error occurs when the data is accessed through the auxiliary processor.
16#1401 An error occurs when the data in the I/O module is accessed. 16#1402 The arrangement of the I/O modules is not consistent with the module table. 16#1407 A communication error occurs when the data is accessed through the auxiliary processor.