AH500 Module Manual Meanwhile, the master will automatically assign 50 bytes of registers in the output list to AH10DNET Slave. 5. Repower AH10DNET-5A after setting is over and then modifying the data length is successful. 10.8.3 Extension Baud Rate Setting When AH10DNET-5A is in slave mode, its extension baud rate can be set as the following steps. 1. Scan AH10DNET-5A in slave mode through the DeviceNet master. “AH10DNET Slave” represents for AH10DNET-5A module in slave mode and “AH10DNET Scanner” refers to AH10DNET-5A module in master mode as the following window shows. 2. Right click AH10DNET-5A (Slave) and select “Parameter Edit…” after scanning is successful. 10-40