Chapter 10 DeviceNet Communication Module AH10DNET 10.9.2 Configuration of DeviceNet Slave 1. PC accesses an AH500 series CPU module via RS232 after connecting the device according to the following figure. 10-43 PS05 viceNet Builder CPU530-EN AH10DNET-5A P S05 C PU530-EN 10DNET RS232 H10DENT-5A on the right of AHCPU530-EN will serve as the slave and theref S232 communication cable must be connected to AHCPU530-EN. SPSoft; select “Tool” >> “Communication Setting” and then the following dialog Select the already built driver and then click “OK”. File” >> “New” >> “New” and the following dialogue box will appear. Click “OK g the corresponding PLC model.
PS05 CPU530-EN AH10DNET-5A P S05 C PU530 -EN 10DNET PU53 be con nication d then followi 0-EN nect Sett click ng di will serve ed to AHC ing” and t “OK”. alogue bo as the slave and theref PU530-EN. hen the following dialog x will appear. Click “OK