AH500 Module Manual Explanation of AHRTU-DNET-5A configuration interface: 11-24 Item Description Scan To detect all modules currently inserted to the I/O slots of the rack. The modules saved on the software will be compared with the modules actually inserted to the I/O slots of the rack and the inconsistency will be displayed with the abnormal icons. When the I/O slot of the rack on the software is empty, the module actually connected to the I/O slot of the rack will be displayed.
If the rack information is not consistent with the actual rack information, the previously saved module information on the software will be deleted and the actual rack information and the modules actually inserted to the I/O slots of the rack will be displayed. Upload It is an opposite action to the download. To upload and display current AHRTU-DNET-5A configuration to the software interface, which includes the I/O list, I/O configuration information, parameter mapping and the basic control information of AHRTU-DNET-5A.
Download To download and save the AHRTU-DNET-5A configuration to AHRTU-DNET-5A, which includes the I/O list, I/O configuration information, parameter mapping and the basic control information of AHRTU-DNET-5A. The configuration is retained when power OFF. Download SCM To download and save the configuration of the serial port data exchange of AH10SCM-5A to AH10SCM-5A, which contains all Modbus configuration or UD Link configuration of COM1 and COM2. The configuration is retained when power OFF. Reset To make the connected AHRTU-DNET-5A restart up once. Clear config Clear the configuration stored in the latched area, reset automatically and F1 appears on the indicator after resetting.
Start Monitor To find and set current exchange data already configured in system in real time, change the output data, find the input data in real time and use the control word to control the running state of AHRTU-DNET-5A. Auto-Addr Automatically allocate the mapping address and allocate the offset of mapping parameters in order. When no selection of mapping parameter is set for user in AIAO module data, system only recognizes the allocated offset of the mapping parameters. Clear-Addr To clear the address allocation of all modules. After clicking this button the mapping addresses of all modules can be reallocated. Rack 1 Select and set the mapping range of each module on the rack.
The start offset of mapping range can be set and the length depends on the quantity of the register mapped by the module parameter. SCM To set the mapping range of serial port data exchange of AH10SCM-5A, the start offset and length. Input and output mapping length are both 20 words. Slot The serial number of the slot of the module on the rack Name The name of the module Firmware The firmware version of the module. Through selecting the corresponding firmware version, download the module parameter information which matches the firmware version of the module.
Description Describe the basic information of each module Input The input data mapping range of each module which depends on the start address offset and length of input mapping data