Chapter 11 DeviceNet Remote I/O Module AHRTU-DNET 11.4.2.6 AH10SCM-5A Module Configuration Interface AH10SCM-5A parameter setting When AH10SCM-5A is used as the I/O module of AHRTU-DNET-5A, please ensure that the master on the network is AH10DNET-5A and AH10SCM-5A has been inserted to the I/O slot of the main rack. If the master is DVPNET on the network, AHRTU-DNET-5A will not support to configure AH10SCM-5A. On the main configuration interface of AHRTU-DNET-5A, double click AH10SCM-5A to set the parameter mapping. 11-37