Chapter 11 DeviceNet Remote I/O Module AHRTU-DNET The interface is shown as below after the new item of Read/ Write is added. Double click the newly added item to enter the parameter editing interface of Read/Write of Modbus, where set the mapping relations of the serial port data exchange between the master and slave. Explanation of parameter editing interface:
11-43 Item Explanation PLC Type To display the preset PLC model used as the CPU where the mapping registers are Data Address The register in the master PLC for exchanging the data with the slave Description Description of the device where the data of maximum 30 bytes can be input Slave ID The station number of the slave to exchange the data with AH10SCM-5A Device Type Delta PLC model is selectable; default: other Device If the non-Delta PLC device is used, select other Device.