AH500 Module Manual Command Edit interface: Explanation of Command Edit interface: 11-48 Item Explanation Command No. Each group has its number and the execution order is specified through the number. Command Type Send, Receive and Send & Receive are for option. Send Packet The name of the packet already built in the group could be selected. Receive packet The name of the packet already built in the group could be selected. Success It specifies the action after the command execution is completed. Next, Goto and End are for option. Next: To execute the next command E.g. the number of the currently executed command is 1; the next one to be executed is the command of number 2. Goto:
To skip to execute the command Directly specifies the command of a bigger number. End: Finish Fail To specify the action after the command execution is completed; Next, Goto and End are for option. Next: To execute the next command. E.g. the number of the currently executed command is 1; the next one to be executed is the command of number 2. Goto: To skip to execute the command; directly specify the command of a bigger number. End: Finish. Retry The retry times when transfer failure occurs Repeat The repeated execution times when the command execution succeeds Transfer delay The interval time for sending every message; default:
0 which means that the next command will be sent out immediately once the response is received Timeout After the serial port releases the command, no response is received within the set time, that is, communication timeout. Default: 50 ms