Chapter 13 PROFIBUS Slave Module AH10PFBS 13.9 Application Example 1 13.9.1 Control Request Complete the data exchange between S7-300 (Siemens PLC) and AHCPU530-EN through the PROFIBUS-DP network. 13.9.2 Connecting AH10PFBS-5A to the PROFIBUS-DP Network 1. Siemens S7-300 serves as the PROFIBUS-DP master and AH10PFBS-5A+AHCPU530-EN serves as the slave in this example. PROFIBUS-DP network figure: 2. Set the PROFIBUS node address of AH10PFBS-5A to 1. 3. Insert AH10PFBS-5A to the I/O interface of the main AH500 series rack and ensure that the AH500 series CPU module is connected to AH10PFBS-5A normally. 13.9.3 Applied Software ISPSoft is one of the PLC programming software of Delta.
Users can download it at Delta website and click the following link to enter the download page. http://www.deltaww.com/ Siemens S7-300 is used as the PROFIBUS-DP master and Siemens PLC software Step 7 is taken as an example for an introduction. 13-15