Kaiyi — 13.9.4 Configuration of AH10PFBS-5A via ISPSoft

Chapter 13 PROFIBUS Slave Module AH10PFBS 4. Double click “10PFBS” icon in the above window and then “Parameter Setting” dialog box pops up. Click the left-side “Conversion Flags (Read Only)”; then click the place indicated by the blue arrow in “Parameter Setting” dialog box and “Address” dialog box appears immediately, where input the specified state register number. E.g. the input 0 indicates to specify D0 as the state register. The state register of AH10PFBS-5A can only be D device. The state register can be used to display whether the AH500 series CPU module is in RUN or STOP state and whether the PROFIBUS communication of AH10PFBS-5A is normal.

See the introduction in section 8.3 for more details. 5. Click “File”>“Save” to save the hardware configuration. 13-19