Kaiyi — 14.7.2 Configuration of PROFIBUS DP Network

AH500 Module Manual  Configuration of AHRTU-PFBS-5A Slave 1. Double click AHRTU-PFBS-5A slave icon and the slave configuration interface is opened. “Available Modules” includes all configuration options that AHRTU-PFBS-5A supports. “Configured Modules” includes the actual configuration options. The inputs and Outputs of AHRTU-PFBS-5A are the sum of the inputs and outputs of all configuration options respectively with byte as the unit. 2. Add I/O module as below. Select the desired module in “Available Modules”; then click “Insert” button and the desired module is added to the “Configured Modules”.

If there is no module in “Configured Modules”, the selected module can be added to “Configured Modules” directly. If there are modules added in “Configured Modules”, the desired module will be added to the previous line of the selected module in “Configured Module” by clicking “Insert” button. Select the desired module in “Available Modules”; then add the selected module to the last line in “Configured Modules” by clicking “Appendix” button or by double clicks on the desired module in “Available Modules”. 14-20