Chapter 14 Remote I/O Communication Module AHRTU-PFBS Ensure that all I/O module parameters settings are correct. Otherwise, the module will report the error or the communication error of AHRTU-PFBS-5A occurs. 4. Click “Extensions” on the left-side window and then the following settings are done. (The settings here are default. For the meaning of each option, please refer to section 10.2 in the SYCON.net help.) 14-37 Name Setting Explanation Mode: T-Type Mode: E-Type Mode: -Type Mode:±150mV CH0~CH7 Input average time 0x0A Average times setting for CH0~ CH7 input