Chapter 14 Remote I/O Communication Module AHRTU-PFBS 16. Double click the slave AHRTU-PFBS-5A icon and then the slave configuration interface is opened as follows. Add AH16AP11R-5A, AH08DA-5B, and AH06XA-5A; “Available Modules” contains all configuration options that AHRTU-PFBS-5A supports and “Configured Modules” includes actually configured configuration options. The input length and output length of AHRTU-PFBS-5A refer to the sum of input lengths and output lengths of all configuration options respectively. The following Inputs, Outputs and In/Out marked in red regard Byte as their unit and In/Out refer to the length of input and output.
In the following configuration, the sum of input lengths and output lengths of AHRTU-PFBS-5A are 14 bytes and 26 bytes respectively. Insert: When there is no module in “Configured Modules”, select the desired module in “Available Module”; click “Insert” and then the selected module is added to “Configured Module”. When there are modules existing in “Configured Modules”, select the desired module in “Available Module”; click “Insert” and then the selected module is inserted above the selected module in “Configured Module”. Append: Select the desired module from “Available Modules” and add it to the last row in “Configured Modules” clicking “Append” button.
Or double click the desired module in “Available Modules” and then the module is directly added to the last row in “Configured Modules”. Remove: Select the module to be deleted in “Configured Modules” and delete it clicking “Remove”. Note: The same module in “Available Modules” can be added to “Configured Modules” multiple times. Click multiple modules in “Available Modules” or “Configured Modules” while pressing Ctrl key and then the multiple modules are selected. 14-61