Kaiyi — 15.5.2 Sending an SDO Command

AH500 Module Manual 15.5.2 Sending an SDO Command 1. Function block The AH10COPM-5A module which functions as a master station in a slot on the main backplane used can send an SDO command by means of the function block CANopen_SDO in ISPSoft. 2. Input pins/Output pins 15-24 Input pin Name Function Data type Setting Time when a value is valid value SID Slot number WORD K0~K11 The value of the SID input pin is valid when there is a transition in the Execute input pin’s signal from low to high. Execute The function block is executed when there is a transition in the Execute input pin’s signal from low to high. BOOL True/False - NodeID Node address WORD K1~K127 - Service Service type WORD 1:

Reading 2: Writing - ODIndex Index WORD - - ODSubIndex Subindex WORD - - WriteLength Length of the data which is written WORD K1~K8 (Unit: Byte) The value of the WriteLength input pin is valid when there is a transition in the Execute input pin’s signal from low to high. DataWrite Data which is written DWORD[2] - The value of the DataWrite input pin is valid when there is a transition in the Execute input pin’s signal from low to high.