Kaiyi — 15.5.5 Obtaining the States of the Slave Stations on a CANopen Network

AH500 Module Manual 15.5.5 Obtaining the States of the Slave Stations on a CANopen Network 1. Function block Users can obtain the states of the slave stations on a CANopen network from the AH10COPM-5A module in a slot on the main backplane used by means of the function block CANopen_Info. 2. Input pins/Output pins 15-32 Input pin Name Function Data Setting value Time when a value is valid type SID Slot number WORD K0~K11 The value of the SID input pin is valid when there is a transition in the Execute input pin’s signal from low to high. Execute The function block is executed when there is a transition in the Execute input pin’s signal from low to high.

BOOL True/False - Output pin Name Function Data type Time when there is Time when there is a transition in an output pin’s signal from high to low a transition in an output pin’s signal from low to high Done The execution of the function block is complete. BOOL  There is a transition in the Done output pin’s signal from low to high when the execution of the function block is complete.  There is a transition in the Done output pin’s signal from high to low when there is a transition in the Execute input pin’s signal from high to low.  If the Execute input pin is set to False when the execution of the function block is complete, the Done output pin will be set to False in the next cycle.