Chapter 16 Remote I/O Module AHRTU-ETHN-5A • Statistic The page displays the statistic information about relevant network function. The statistic information will be recalculated after repower on. 16-23 Field Description Rack It indicates a backplane ID. When the set rack ID is in IO table but it is inconsistent with the actually connected rack ID, the background is red. When the actually connected rack ID can be detected but the rack ID is not in IO table, the background is yellow. Power Name Power ID is sent back and can be transformed into a module name.
RTU Name Module ID is sent back and can be transformed into RTU name RTU FW Version The firmware version for RTU MS LED Module status indicator on RTU NS LED Network status indicator on RTU IO LED IO indicator on RTU RTU Error Code Error code in RTU RTU Error Error message in RTU Message Module N Name The module ID is sent back and can be transformed into a module name. When it is in IO table but is inconsistent with the actually connected module ID, the background is red. Module N Name When the actually connected module ID can be detected but it is not in IO table, the background is yellow.
Module Version Firmware version of a module RUN LED When a module is in RUN status, the indicator is in green light. When a module is in STOP state, the indicator is OFF. ERROR LED When an error occurs in a module, the indicator blinks in red light. When a warning occurs in a module, the indicator is in yellow light. When no error exists in a module, the indicator is OFF. Error Code Error code of a module Error Message Error message of a module Refresh Cycle The default value of the refresh cycle; it is10 with the unit: seconds. “-“ button The value of update cycle is decreased by 1 every time when clicking the button. The min. value of update cycle is 1.
“+“ button The value of update cycle is increased by 1 every time when clicking the button. The max. value of update cycle is 60.