AH500 Motion Control Module Manual S 1 : Minuend; S 2 : Subtrahend; D : Difference The binary value in S 2 is subtracted from the binary value in S 1 , and the difference is stored in D . The highest bit in S 1 and the highest bit in S 2 are sign bits. If the sign bit in a register is 0, the value in the register is a positive value. If the sign bit in a register is 1, the value in the register is a negative value. SM1064 is the zero flag in an Ox motion subroutine, and SM968 is the zero flag in O100. SM1065 is the borrow flag in an Ox motion subroutine, and SM969 is the borrow flag in O100. SM1066 is the carry flag in an Ox motion subroutine, and SM970 is the carry flag in O100.
The flags related to 16-bit binary subtraction and 32-bit binary subtraction are listed below. 16-bit binary subtraction: 1. If the operation result gotten is 0, a zero flag will be ON. 2. If the operation result gotten is less than –32,768, a borrow flag will be ON. 3. If the operation result gotten is greater than 32,767, a carry flag will be ON. 32-bit binary subtraction: 1. If the operation result gotten is 0, a zero flag will be ON. 2. If the operation result gotten is less than –2,147,483,648, a borrow flag will be ON. 3. If the operation result gotten is greater than 2,147,483,647, a carry flag will be ON.
Please refer to the additional remark on the instruction ADD for more information about the relations between flags and values. Explanation 16-bit binary subtraction: When X0.0 is ON, the subtrahend in D10 is subtracted from the minuend in D0, and the difference is stored in D20. Example 1 X0.0 When X0.1 is ON, the subtrahend in (D41, D40) is subtracted from the minuend in (D31, D30), and the difference is stored in (D51, D50).
Example 2 X0.1 5-40 API Instruction code Operand Function 21 D SUB P S , S , D 1 2 Binary subtraction Device Xn.n Yn.n M S K 16# F KnM KnS D W T C V Z S 1 S 2 D Pulse instruction 16-bit instruction (7 steps) 32-bit instruction (9 steps) .0 SUB D0 D10 D20 DSUB D30 D40 D50