Mitsubishi — 5.6 Descriptions of the Applied Instructions

Chapter 5 Applied Instructions Explanation  S : Initial device; D : Device into which a value is written; n : Number of devices  The values in the n word devices starting from S are defined as first in, first out values, and S is taken as a pointer. When the instruction is executed, the value in S decreases by one, the value in S + 1 is written into D , the values in S + n -1~ S +2 are moved rightwards, and the value in S + n -1 is unchanged. When the value in S is equal to 0, the instruction does not process the reading of the values, and the zero flag SM20 is ON.

 If KnM/KnS is used, it is suggested that M device numbers/S device numbers should start from a number which is a multiple of 16 in the decimal numeral system, e.g. K1M0 and K4S16 (decimal numeral system).  Generally, the pulse instruction SFRDP is used.  2≤ n ≤512  When X0.0 is turned from OFF to ON, the value in D1 is written into D21, the values in D9~D2 are moved rightwards, the value in D9 is unchanged, and the value in D0 decreases by one.  The value in D1 is moved and written into D21 in the way described below.  The value in D1 is written into D21.  The values in D9~D2 are moved rightwards.  The value in D0 decreases by one. Example X0.0 The value in D1 is read.

5-59 API Instruction code Operand Function Moving a value and 39 SFRD P S, D, n reading it from a word device Device Xn.n Yn.n M S K 16# F KnM KnS D W T C V Z S         D         n   Pulse instruction 16-bit instruction (7 steps) 32-bit instruction   – .0 SFRDP D0 D21 K10 n=10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 D21 Pointer D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 D21