Mitsubishi — 5.6 Descriptions of the Applied Instructions

Chapter 5 Applied Instructions  S : Source device; D : Device in which a decoding result is stored; n : Number of bits which are decoded  The low n bits in S are decoded as the low 2 n bits in D .  Generally, the pulse instruction DECOP is used.  D is in the range of 1 to 8. Explanation  When D is a bit device, n is in the range of 1 to 8. If n is 0, or greater than 8, an error will occur.  If n is 8, the maximum number of bits which can be decoded is 2 8 =256.  When X2.0 is turned from OFF to ON, the instruction DECOP decodes X0.0~X0.2 as M100~M107.  If the value in S is 3, M103 will be ON.

 After the instruciton is executed, X2.0 will be OFF, and the states of M100~M107 will remain unchanged. Example 1 DECOP K3 X2.0 X0.2 X0.1 X0.0 4 1 2 3 0 3 7 6 5 4 2 1 0  When D is a word device, n is in the range of 1 to 8. If n is 0, or greater than 8, an error will occur.  If n is 8, the maximum number of bits which can be decoded is 2 8 =256.  When X2.0 is turned from OFF to ON, the instruction DECOP decodes b2~b0 in D10 as b7~b0 in D20, and b15~b8 in D20 become 0.  The low 3 bits in D10 are decoded as the low 8 bits in D20. The high 8 bits in D20 are 0.  After the instruciton is executed, X2.0 will be OFF, and the value in D20 will remain unchanged.

M107 M106 M105 M104 M103 M102 M101 M100 Example 2 X2.0 b15 b0 D10 b15 b0 D20 5-61 API Instruction code Operand Function 41 DECO P S, D, n Decoder Device Xn.n Yn.n M S K 16# F KnM KnS D W T C V Z S           D          n   Pulse instruction 16-bit instruction (7 steps) 32-bit instruction   – X0.0 M100 0 1 1 0 0 0 0 1 0 0 DECOP D10 D20 K3 0 1 0 1 0 1 0 1 0 1 0 1 0 0 1 1 4 2 1 Bit 15~bit 8 in D10 become 0. 7 6 5 4 3 2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0