Mitsubishi — 5.6 Descriptions of the Applied Instructions

AH500 Motion Control Module Manual  A radian/degree flag is reset to OFF. The binary floating-point value in (D1, D0) is a radian. When X0.0 is ON, the cosine of the binary floating-point value in (D1, D0) is stored in (D11, D10). Example 1 M1002 X0.0 S Binary floating-point value Radian Degree 180) ( X p / D Cosine value Binary floating-point value Example 2  A radian/degree flag is set to ON. The value in (D1, D0) is a degree in the range of 0° to 360°. When X0.0 is ON, the cosine of the value in (D1, D0) is stored in (D11, D10). The value in (D11, D10) is a binary floating-point value.

Radian/Degree flag M1002 X0.0 SET DCOS Degree S Cosine Binary floating-point value  Please refer to section 5.3 for more information about performing D Additional remark operations on floating-point numbers. 5-96 RST Radian/Degree flag DCOS D0 D10 D 1 D 0 D 11 D 10 D0 D10 D 1 D 0 D 11 D 10