Mitsubishi — 5.6 Descriptions of the Applied Instructions

AH500 Motion Control Module Manual Additional remark  16-bit instruction: The value in S 1 is in the range of the minimum source value and the maximum source value, i.e. the value in S 1 is in the range of -32,768 to 32,767. If the value in S 1 exceeds the minimum source value/the maximum source value, the minimum source value/the maximum source value will be used.  32-bit instruction: The integer in S 1 is in the range of the minimum source value and the maximum source value, i.e. the integer in S 1 is in the range of -2,147,483,648 to 2,147,483,647.

If the integer in S 1 exceeds the minimum source value/the maximum source value, the minimum source value/the maximum source value will be used.  32-bit instruction: The floating-point value in S 1 is in the range of the minimum source value and the maximum source value, i.e. the floating-point value in S 1 is a 32-bit floating-point value available. If the floating-point value in S 1 exceeds the minimum source value/the maximum source value, the minimum source value/the maximum source value will be used.

 If users use the instruction, the maximum source value must be greater than the minimum source value, and the maximum destination value does not have to be greater than the minimum destination value. 5-122