AH500 Motion Control Module Manual 2.1 Hardware Specifications Electrical specifications and wiring are described in this chapter. Please refer to other chapters for more information about the writing of a program and the use of instructions. For more information about the peripherals purchased, please refer to the manuals attached to them. 2.1.1 General Specifications 2.1.2 Electrical Specifications for the Input Terminals 1. AH20MC-5A 2-2 Item Specifications Connector type High precision connector It must be connected to an external terminal module.
5 V DC (-15~20%), 24 V DC (-15~20%) (AHPS05-5A supplies power through a bus.) Supply voltage Electric energy 2 W consumption Insulation voltage 2,500 VDC Weight 150 g ESD (IEC 61131-2, IEC 61000-4-2): ±10 kV air discharge EFT (IEC 61131-2, IEC 61000-4-4): Communication I/O: ±4 kV CS (IEC 61131-2, IEC 61000-4-6): 0.15~80 MHz, 3 Vrms RS (IEC 61131-2, IEC 61000-4-3): 80~100 MHz, 10 V/m, 1.4~2.0 GHz Noise immunity Operating environment: -20~70°C (Temperature), 5~95% (Humidity), pollution degree 2 Storage environment:
-40~85°C (Temperature), 5~95% (Humidity) Operating/Storage environment Vibration/Shock International standards IEC 61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea) resistance Standard Item Differential input Specifications High speed of 200 kHz Wiring type Independent wiring Input voltage 5~24 V DC Maximum input current 15 mA Action OFFON 20 us level ONOFF 30 us Response time/Noise 10 ms/0.5 us reduction