AH500 Motion Control Module Manual FB1 Timing diagram: Execute1 t Busy1 t Done1 t Aborted1 FB2 t Execute2 t Busy2 t Done2 5. Modules which are supported t The motion control function block T_GcodeStop supports AH05PM-5A, AH10PM-5A, AH15PM-5A, and AH20MC-5A. 5.11.4 Reading an M-code 1. Motion control function block The motion control function block T_Mcode is used to read an M-code, and clear the M-code specified. The CLRMcode input pin is used to clear the M-code specified. 2. Input pins/Output pins 5-212 1 0 1 0 1 0 1 0 1 0 1 0 1 0 Input pin Name Function Data Setting value Time when a value is valid type Enable Enabling the reading of an M-code WORD True/False -