AH500 Motion Control Module Manual 5.12.3 Writing the Value of a Parameter into a Servo Drive 1. Motion control function block The motion control function block T_DMCServoWrite is used to write the value of a parameter into the servo drive specified on a DMCNET. The value of the Axis input pin indicates an axis number, the value of the Group input pin indicates a group number, the value of the Parameter input pin indicates a parameter number, the value of the DataType input pin indicates a data type, and the value of the Value input pin indicates the value written into the servo drive specified. 2.
Input pins/Output pins 5-224 Input pin Name Function Data Setting value Time when a value is valid type Axis Motion axis number WORD 1~12 The value of the Axis input pin is valid when there is a transition in the Execute input pin’s signal from low to high. Execute The value of a parameter is written into a servo drive when there is a transition in the Execute input pin’s signal from low to high. BOOL True/False - Group Group number (Please refer to ASDA-A2 Series User Manual for more details.) WORD 0~9 The value of the Group input pin is valid when there is a transition in the Execute input pin’s signal from low to high.
Parameter Parameter number (Please refer to ASDA-A2 Series User Manual for more details.) WORD 0~99 The value of the Parameter input pin is valid when there is a transition in the Execute input pin’s signal from low to high. Value Value of a parameter (Please refer to ASDA-A2 Series User Manual for more details.) DWORD K-2,147,483,647~ K2,147,483,647 The value of the Value input pin is valid when there is a transition in the Execute input pin’s signal from low to high.