AH500 Motion Control Module Manual 3. Troubleshooting 4. Modules which are supported The motion control function block T_SDDevWrite supports AH10PM-5A, AH15PM, and AH20MC-5A. 5.13.3 Restoring the Values in Devices in an SD Card 1. Motion control function block The motion control function block T_SDDevRead is used to read the values in the devices specified from the file specified in an SD card. The value of the FileName input pin indicates a filename, and the value of the Device input pin indicates a device type. The value of the Begin input pin indicates a starting device, and the value of the End input pin indicates a terminal device. 2.
Input pins/Output pins 5-242 Error Troubleshooting The values of input pins in the motion control function block are incorrect. Check whether the values of the input pins are in the ranges allowed. Input pin Name Function Data Setting value Time when a value is valid type Execute The restoration of the values in devices in an SD card is enabled when there is a transition in the Execute input pin’s signal from low to high. BOOL True/False - FileName Filename WORD K0~4095 The value of the FileName input pin is valid when there is a transition in the Execute input pin’s signal from low to high. Device Device type WORD mcSD M (0): _ M device mcSD D (5): _ D device mcSD W (6):
_ W device The value of the Device input pin is valid when there is a transition in the Execute input pin’s signal from low to high. Begin Starting device WORD M: K0~4,096 D: K0~9,999 W: K0~65,535 The value of the Begin input pin is valid when there is a transition in the Execute input pin’s signal from low to high.