Mitsubishi — 8.4.2 Function Block—T_CamCurve

AH500 Motion Control Module Manual  Example The steps of creating a rotary cut curve by means of the motion control function block T_CamCurve are described below. Distance for which the master axis specified moves=1000 Distance for which the slave axis specified moves=500 Distance for which the slave axis specified is synchronized with the master axis specified=300 Synchronization ratio of the speed of the slave axis specified to the speed of the master axis specified=1.0 The rotary cut curve created and the values of parameters are shown below.

【 Function 】 500 Displacement 0 -500 0 100 200 300 400 500 600 700 800 900 1,000 Angle Distance for which the axis specified is synchronized with the m aster axis specified:300 1 Velocity 0 -1 0 100 200 300 400 500 600 700 800 900 1,000 Angle 【 Steps 】  Open a CAM Chart window in PMSoft, and then type 300 in the Resolution box.  Download the program created to an AH500 series motion control module, and then execute the program.  After M1 is set to True, a rotary cut curve will be created.  Stop the AH500 series motion control module, and then upload the program in the AH500 series motion control module.  View the first curve in the CAM Chart-0 window.

The curve is a rotary cut curve which is created automatically. 8-26 Dista axis s nce fo pecif r whic ied mo h t ve Sy sp nchro ecifie nizati d to th on rati e spee o of t d of t he spe he ma ed of ster a the xis Dista axis nce f specif or whi ied m ch the oves:

mast 1,000 er Parameter Setting value Distance for which the master axis specified moves 1000 Distance for which the slave axis specified moves 500 Distance for which the slave axis specified is synchronized with the master axis specified 300 Synchronization ratio of the speed of the slave axis specified to the speed of the master axis specified 1.0 Maximum ratio of the speed of the slave axis specified to the speed of the master axis specified 10.0 Acceleration curve 0 Cam curve 0 Concatenation 0