Mitsubishi — 11.4 Capture

AH500 Motion Control Module Manual 4. The setting of the high-speed capture is read when M3 is ON. 5. When M4 is ON, K1 is moved to SM204~SM207. C204 is started when M5 is set to ON. (Mode of counting: Pulse/Direction) 6. Use a manual pulse generator, and check whether C204 counts. 7. Use the manual pulse generator, and set X0.1 to ON. 8. The value captured is read when M3 is ON. When X0.1 is ON, the value in C204 is captured. The value captured is 677. When X0.1 is ON, the value in C204 is captured. 11-12