AH500 Motion Control Module Manual 13.1 Functions An AH500 series motion control module is embedded with a memory card slot for external memory extension. The slot is compatible with the memory card formats FAT16 and FAT 32, and the maximum storage is 4 GB. The four functions of the memory card for an AH500 series motion control module are described below. 1. G code reading and execution 2. Device backup and restoration 3. Program backup and restoration 4. Firmware update The files for the four functions above are saved in the following paths in a memory card. 1. \AHMotion\Gcode\ 2. \AHMotion\Device\ 3. \AHMotion\Program\ 4.
\AHMotion\bin\ 13.2 Parameters List of parameters Description of parameters: 1. SR200, SR201: Start/End address of an M device for a memory card backup [Description] To perform restoration by a memory card, the parameters are used to set the start/end address of an M device. If the restoration addresses include SM devices, the SM devices will not be restored, but the rest of the devices within the restoration range will still be restored. 2. SR202, SR203: Start/End address of a timer for a memory card backup [Description] To perform restoration by a memory card, the parameters are used to set the start/end address of a timer. 3. SR204, SR205:
Start/End address of a 16-bit counter for a memory card backup [Description] To perform restoration by a memory card, the parameters are used to set the start/end address of a 16-bit counter.
13-2 Parameter Function SR200 Start address of an M device for a memory card backup SR201 End address of an M device for a memory card backup SR202 Start address of a timer for a memory card backup SR203 End address of a timer for a memory card backup SR204 Start address of a 16-bit counter for a memory card backup SR205 End address of a 16-bit counter for a memory card backup SR206 Start address of a 32-bit counter for a memory card backup SR207 End address of a 32-bit counter for a memory card backup SR208 Start address of an S device for a memory card backup SR209 End address of an S device for a memory card backup SR210 Start address of a D device for a memory card backup SR211 End address of a D device for a memory card backup SR212 Start address of a W device for a memory card backup SR213 End address of a W device for a memory card backup SR214 Control register for a memory card backup