Chapter 13 Expansion Storage Device 3. Save different .bin files in the folder AHMotion\bin according to the model of an AH500 series motion control module. i AH20MC-5A: C5A20MC.bin and G5A20MC.bin are saved in the folder. ii AH10PM-5A: C5A10PM.bin and G5A10PM.bin are saved in the folder. iii AH15PM-5A: C5A15PM.bin and G5A15PM.bin are saved in the folder. iv AH05PM-5A: C5A05PM.bin and G5A05PM.bin are saved in the folder. 4. Insert a memory card into the memory card slot, and supply the module with power. When the RUN LED indicator blinks, the firmware of the motion control module is updated. After the update is completed, the RUN LED indicator will be ON.
If an error occurs during the update, the ERROR LED indicator will be ON. 5. After the update is complete, move the switch to its original direction. After the update is completed, supply the motion control module with power again, and run the motion control module. 13-9