AH500 Motion Control Module Manual 14.1 Functions AH20MC-5A is equipped with a DMCNET port. A DMCNET is Delta motion control communication. It is a real-time system. It only takes 1 millisecond to update the commands sent to the twelve axes in AH20MC-5A. There are several modes of returning home. The twelve axes in AH20MC-5A can move synchronously. They are divided into four groups so that three-axis helical/linear interpolation can be used. They are divided into six groups so that two-axis linear/circular interpolation can be used. A DMCNET supports twelve Delta ASDA-A2-F AC servo drives.
Users can write the values of parameters into a servo drive and read the values of parameters from the servo drive by means of a DMCNET. User can instruct an axis to return home by means of a DMCNET, and axes can move synchronously by means of a DMCNET. 14.2 Specifications Connector Communication 14-2 Item Specifications Transmission type DMCNET Electrical isolation 500 V DC Connector Removable connector (5.08 mm) Transmission cable Four communication cables Item Specifications Data type Static frame and dynamic frame Serial transmission speed There are two channels. The serial transmission speed of a channel is 10 megabits per second.
Maximum transmission distance 20 meters (A 120 ohm terminal resistor is required.)