Chapter 15 Setting USB Communication in PMSoft (2) Select a driver in the Driver drop-down list box. Before users create a connection between PMSoft and an AH500 series motion control module, they have to make sure that the driver is started in COMMGR. Select the Motion Controller option button, and click OK . The communication setting varies with the driver selected. RS232 and USB Users have to select the station address of the AH500 series motion control module connected to the computer in the Station drop-down list box. If the station address selected is 0, a broadcast communication will be carried out.
If the AH500 series motion control module used can not communicate with PMSoft, or the users do not know the station address of the AH500 series motion control module connected to the computer, they can select 0 in the Station drop-down list box. 15-9