Chapter 3 Devices Setting value: Actual time measured by a timer= Unit of measurement for time x Setting value 1. Constant preceded by K: A setting value can be a constant preceded by K. 2. Value in a data register: A setting value can be the value in a data register. 3.8 Counters Counter (C): Counter numbers are decimal numbers. AH20MC-5A AH10PM-5A AH15PM-5A 3-7 Function Range Remark 16-bit up C0~C199 counter 200 counters 216 If the present value of the counter specified by the 32-bit C240~C255 counters instruction CNT (DCNT) matches the setting value, the up/down 16 counters in total contact represented by the counter will be ON. counter (Accumulation) Input contact of C200:
X0.8+/X0.8-/X0.9+/X0.9- Input contact of C204: X0.10+/X0.10-/X0.11+/X0.11- Input contact of C208: X0.12+/X0.12-/X0.13+/X0.13- Input contact of C212: X0.14+/X0.14-/X0.15+/X0.15- Input contact of C216: X0.12+/X0.12-/X0.13+/X0.13- Input contact of C220: X0.14+/X0.14-/X0.15+/X0.15- C200, C204, 32-bit 6 C208, C212, high-speed counters C216, and C220 counter in total 6 counters Function Range Remark 16-bit up C0~C199 counter 200 counters 216 If the present value of the counter specified by the 32-bit C240~C255 counters instruction CNT (DCNT) matches the setting value, the up/down 16 counters in total contact represented by the counter will be ON. counter (Accumulation) Input contact of C200:
X0.8/X0.9 Input contact of C204: X0.10/X0.11 Input contact of C208: X0.12/X0.13 Input contact of C212: X0.14/X0.15 Input contact of C216: X0.12/X0.13 Input contact of C220: X0.14/X0.15 C200, C204, 32-bit 6 C208, C212, high-speed counters C216, and C220 counter in total 6 counters Function Range Remark 16-bit up C0~C199 counter 200 counters 216 If the present value of the counter specified by the 32-bit C240~C255 counters instruction CNT (DCNT) matches the setting value, the up/down 16 counters in total contact represented by the counter will be ON. counter (Accumulation) Input contact of C200: X0.8/X0.9 Input contact of C204: X0.10/X0.11 Input contact of C208:
X0.12/X0.13 Input contact of C212: X0.14/X0.15 Input contact of C216: X0.12/X0.13 Input contact of C220: X0.14/X0.15 C200, C204, 32-bit 6 C208, C212, high-speed counters C216, and C220 counter in total 6 counters